Suzuki 6 hp outboard models feature an external fuel tank connection as standard equipment allowing the user to easily connect an optional external fuel tank for longer range and a 3-star ultra-low emission rating. This model offers the standard Suzuki 3-year warranty.
- Compact and Lightweight Design
- 3 Way Storage: Stbd, Port, or Front
- Saltwater Rated
- Multi-Layer Corrosion Protection
- Quiet Below-the-Water Exhaust
- Fold-Down Tiller Handle
- Rubber Mount Bracket System
- Twist-Grip Throttle with Tensioner
- Large Carrying Handle
- Large Gear Shift Lever
- Digital CDI Ignition for Quick Starting
- Larger Carburetor for Additional HP
- 3-Star Ultra-Low Emission Rating
- Shallow Water Drive (2 positions)
- 5 Trim Positions w/Tilt Lock Pin
- Over-Rev Limiter Protection
- Throttle Tension Control
- Steering Friction Tension Control
- 90° Left / Right Turning for Tight Spots
- Emergency Lanyard Stop Switch
- Built-in .26 Gal. Fuel Tank (45 min. @ WOT)
- External Tank Ready Connection on Engine
(optional fuel tank $80.00 fuel line $75.00) - 3-Blade Aluminum Propeller
MODEL | DF6AL2 |
---|---|
SKU | DF6AL2-20 |
WEIGHT | 54.0 lb |
MANUFACTURER | Suzuki |
COUNTRY OF MANUFACTURE | Thailand |
HORSEPOWER | 6hp |
SHAFT LENGTH | 20″ (Long) |
STEERING | Tiller |
STARTING | Manual |
TRIM & TILT | Manual |
FUEL DELIVERY | Carburetor |
FUEL TANK | Internal |
CYLINDER(S) | 1 |
DISPLACEMENT | 138 cc (8.4 cubic inches) |
BORE AND STROKE | 2.38 x 1.89 inches |
FULL THROTTLE RPM RANGE | 4750-5750 RPM |
IGNITION SYSTEM | Digital Capacitor Discharge Ignition System |
INDUCTION SCAVENGING | OHV |
VALVES PER CYLINDER | 2 |
FUEL TYPE | Unleaded Gasoline (87 octane) |
FUEL TANK / FUEL LINE | .26 US Gallon Integral Fuel Tank |
OIL TYPE | SAE 10W-30 or SAE 10W-40 |
OIL CAPACITY | 24 fl oz. (700 mL) |
LUBRICATION | Wet Sump |
ALTERNATOR | Optional 12V 5A (installation required) |
COOLING SYSTEM | Water-Cooled |
SALTWATER RATED | Yes |
GEAR RATIO | 1.92:1 |
GEAR SHIFT | Forward-Neutral-Reverse (starboard side lever) |
PROPELLER | 3-Blade Aluminum 7.5″ Dia x 7.0 ” Pitch |